Piteşti | Biblioteca Universităţii |

Limba:
Română
- English

Annals of the University of Petroşani. Mechanical Engineering : 2017/Vol. 19 (XLVI)

Tipul înregistrării:	Text tipărit: serial
Editor:	Iliaş, Nicolae
Autor colectiv:	Universitatea din Petroşani
Responsabilitate:	Universitatea din Petroşani
Responsabilitate secundară:	Ed.-in-chief prof. eng. Nicolae Iliaş
Editura:	Universitatea din Petroşani
Locul publicării:	Petroşani
Anul Ediției:	2017
Tipografie:	[s.n.]
ISSN:	1454-9166
Limba:	Engleză
Subiect:	Inginerie. Tehnică în general
Subiect:	Publicații periodice digitizate
Cota topografică:	62(05) / A 48
Clasificare:	378.4(05)
Clasificare:	62(05)
Numerotare seriale:	Vol. 19 (XLVI)
Note conţinut (cuprins):	Research on the Mechanization of Technological Processes in the Execution of Vertical Mining Works for Aeration of Secondary Pipelines at Hateg Hydroconstruction - p. 5
Note conţinut (cuprins):	Stand for the Rotative Boring of Rock Salt - p. 15
Note conţinut (cuprins):	The Constructive Analysis of the Borer Heads for the Rotative Boring of Soft Rocks - p. 23
Note conţinut (cuprins):	Reliability Study of Esrc-1400 Bucket Wheel Excavator Travel System. A new Approach - p. 31
Note conţinut (cuprins):	Aspects Regarding Maintainabilty Analysis of Escr-1400 Bucket Whell Excavator - p. 39
Note conţinut (cuprins):	Results Obtained on the Optimization of Labor Use in Work Exercises for Salvators for the Surface Industry - p. 49
Note conţinut (cuprins):	The Equations of Motion of the Extraction Drive Wheel Cable System and the Relation Between the Tensions Between the Extreme Points of the Wrapping of the Cable on the Drive Wheel - p. 55
Note conţinut (cuprins):	Aspects Regarding Determination of Reliability Characteristics for Bucket Wheel Excavator Teeth - p. 63
Note conţinut (cuprins):	Improving the Functional Performances of the Bucket Wheel Excavators (BWEs) Cutting-Teeth - p. 71
Note conţinut (cuprins):	The Analysis of the Deformations and Stresses of the Cutting-Teeth of Bucket-Wheel Excavators (BWEs) During Operation, Using Finite Elements Method (FEM) - p. 81
Note conţinut (cuprins):	Strenght Assessment of a Truss Bridge for Belt Conveyors - p. 91
Note conţinut (cuprins):	Vibration and Current Signature Monitoring Experiences at the Márkushegy Mine Plant - p. 97
Note conţinut (cuprins):	Software in Modeling and Solving Engineering Applications with Finite Element Method as a Work Tool - p. 103
Note conţinut (cuprins):	Deadly Mass Casualty Incidents - A Constant Challenge in the Cooperation Between the Forensic Pathologist and Criminal Prosecutor to Identify the Victims - p. 109
Note conţinut (cuprins):	Research Regarding the Use Of Drones in Monitoring and Controlling Mining Processes and Environment Protection - p. 113
Note conţinut (cuprins):	Technical Solutions for Mining Tunnels Excavation Technology - p. 119
Note conţinut (cuprins):	Improving Security and Health Through Proper Implementation Of The Inspection and Maintenance Programme of Electric Power Ex Equipment Designed in Flameproof Enclosure "D" and Increased Safety "E" Type of Protection - p. 127
Note conţinut (cuprins):	Reliability Analysis of the Braking System of the Industrial Loader/Transporter Machines - p. 135
Note conţinut (cuprins):	Study of the Cutting Forces and Specific Cutting Resistance from the Point of View of the Cutting Direction Relative to Stratification of the Coal Seam - p. 143
Note conţinut (cuprins):	Researches on the Modernization of the Execution Technologies of Digging, Arranging and Fitting Works in Hydrotechnical Constructions - p. 149

62(05) / A 48

Annals of the University of Petroşani. Mechanical Engineering : 2017/Vol. 19 (XLVI) / Universitatea din Petroşani; Ed.-in-chief prof. eng. Nicolae Iliaş. ─ Vol. 19 (XLVI).- Petroşani : Universitatea din Petroşani, 2017 ([s.n.])
Anual
Research on the Mechanization of Technological Processes in the Execution of Vertical Mining Works for Aeration of Secondary Pipelines at Hateg Hydroconstruction - p. 5.
Stand for the Rotative Boring of Rock Salt - p. 15.
The Constructive Analysis of the Borer Heads for the Rotative Boring of Soft Rocks - p. 23.
Reliability Study of Esrc-1400 Bucket Wheel Excavator Travel System. A new Approach - p. 31.
Aspects Regarding Maintainabilty Analysis of Escr-1400 Bucket Whell Excavator - p. 39.
Results Obtained on the Optimization of Labor Use in Work Exercises for Salvators for the Surface Industry - p. 49.
The Equations of Motion of the Extraction Drive Wheel Cable System and the Relation Between the Tensions Between the Extreme Points of the Wrapping of the Cable on the Drive Wheel - p. 55.
Aspects Regarding Determination of Reliability Characteristics for Bucket Wheel Excavator Teeth - p. 63.
Improving the Functional Performances of the Bucket Wheel Excavators (BWEs) Cutting-Teeth - p. 71.
The Analysis of the Deformations and Stresses of the Cutting-Teeth of Bucket-Wheel Excavators (BWEs) During Operation, Using Finite Elements Method (FEM) - p. 81.
Strenght Assessment of a Truss Bridge for Belt Conveyors - p. 91.
Vibration and Current Signature Monitoring Experiences at the Márkushegy Mine Plant - p. 97.
Software in Modeling and Solving Engineering Applications with Finite Element Method as a Work Tool - p. 103.
Deadly Mass Casualty Incidents - A Constant Challenge in the Cooperation Between the Forensic Pathologist and Criminal Prosecutor to Identify the Victims - p. 109.
Research Regarding the Use Of Drones in Monitoring and Controlling Mining Processes and Environment Protection - p. 113.
Technical Solutions for Mining Tunnels Excavation Technology - p. 119.
Improving Security and Health Through Proper Implementation Of The Inspection and Maintenance Programme of Electric Power Ex Equipment Designed in Flameproof Enclosure "D" and Increased Safety "E" Type of Protection - p. 127.
Reliability Analysis of the Braking System of the Industrial Loader/Transporter Machines - p. 135.
Study of the Cutting Forces and Specific Cutting Resistance from the Point of View of the Cutting Direction Relative to Stratification of the Coal Seam - p. 143.
Researches on the Modernization of the Execution Technologies of Digging, Arranging and Fitting Works in Hydrotechnical Constructions - p. 149.
ISSN 1454-9166
= Annals of the University of Petroşani. Mechanical Engineering

Universitatea din Petroşani

378.4(05)
62(05)
Inginerie. Tehnică în general Publicații periodice digitizate

LDR:03535nas 2200481 001 158801
009 ubfixit050.043 Annals of the University of Petroşani : Series Mechanical Engineering
011 $a 1454-9166
040 $a Ro
100 $a 20190322u m u0rumy50 ba
101 0 $a eng
102 $a RO
110 $a akuz 0xx0
200 0 $a Annals of the University of Petroşani. Mechanical Engineering : 2017/Vol. 19 (XLVI) $f Universitatea din Petroşani $g Ed.-in-chief prof. eng. Nicolae Iliaş
207 0 $a Vol. 19 (XLVI)
210 # # $a Petroşani $g [s.n.] $d 2017 $c Universitatea din Petroşani $L s8502
326 $a Anual
327 # # $a Research on the Mechanization of Technological Processes in the Execution of Vertical Mining Works for Aeration of Secondary Pipelines at Hateg Hydroconstruction - p. 5
327 # # $a Stand for the Rotative Boring of Rock Salt - p. 15
327 # # $a The Constructive Analysis of the Borer Heads for the Rotative Boring of Soft Rocks - p. 23
327 # # $a Reliability Study of Esrc-1400 Bucket Wheel Excavator Travel System. A new Approach - p. 31
327 # # $a Aspects Regarding Maintainabilty Analysis of Escr-1400 Bucket Whell Excavator - p. 39
327 # # $a Results Obtained on the Optimization of Labor Use in Work Exercises for Salvators for the Surface Industry - p. 49
327 # # $a The Equations of Motion of the Extraction Drive Wheel Cable System and the Relation Between the Tensions Between the Extreme Points of the Wrapping of the Cable on the Drive Wheel - p. 55
327 # # $a Aspects Regarding Determination of Reliability Characteristics for Bucket Wheel Excavator Teeth - p. 63
327 # # $a Improving the Functional Performances of the Bucket Wheel Excavators (BWEs) Cutting-Teeth - p. 71
327 # # $a The Analysis of the Deformations and Stresses of the Cutting-Teeth of Bucket-Wheel Excavators (BWEs) During Operation, Using Finite Elements Method (FEM) - p. 81
327 # # $a Strenght Assessment of a Truss Bridge for Belt Conveyors - p. 91
327 # # $a Vibration and Current Signature Monitoring Experiences at the Márkushegy Mine Plant - p. 97
327 # # $a Software in Modeling and Solving Engineering Applications with Finite Element Method as a Work Tool - p. 103
327 # # $a Deadly Mass Casualty Incidents - A Constant Challenge in the Cooperation Between the Forensic Pathologist and Criminal Prosecutor to Identify the Victims - p. 109
327 # # $a Research Regarding the Use Of Drones in Monitoring and Controlling Mining Processes and Environment Protection - p. 113
327 # # $a Technical Solutions for Mining Tunnels Excavation Technology - p. 119
327 # # $a Improving Security and Health Through Proper Implementation Of The Inspection and Maintenance Programme of Electric Power Ex Equipment Designed in Flameproof Enclosure "D" and Increased Safety "E" Type of Protection - p. 127
327 # # $a Reliability Analysis of the Braking System of the Industrial Loader/Transporter Machines - p. 135
327 # # $a Study of the Cutting Forces and Specific Cutting Resistance from the Point of View of the Cutting Direction Relative to Stratification of the Coal Seam - p. 143
327 # # $a Researches on the Modernization of the Execution Technologies of Digging, Arranging and Fitting Works in Hydrotechnical Constructions - p. 149
530 0 $a Annals of the University of Petroşani. Mechanical Engineering
606 $3 90095 $a Inginerie. Tehnică în general
606 $3 170037 $a Publicații periodice digitizate
675 $a 378.4(05)
675 $a 62(05)
679 $a 62 $d 62/64; 66/69
702 0 $3 143080 $4 340 $a Iliaş $b Nicolae
710 0 0 $3 82227 $a Universitatea din Petroşani
801 0 $a RO $b UPIT $c 20141202 $g unimarc
850 $a UPIT
852 # # $j 62(05) / A 48