Piteşti | Biblioteca Universităţii |

Buletin Ştiinţific. Seria Autovehicule Rutiere = Scientific Bulletin. Automotive Series : Materiale, tehnologii şi tehnici de management în industria de automobile : Materials, technologies and management techniques in the automobile industry : No. 21, Volume A

Tipul înregistrării:	Text tipărit: serial
Autor:	Bădescu, Neculae (1942-)
Selectator/Antologator/Redactor:	Tabacu, Ion, prof.univ.dr.ing. (1949-)
Autor colectiv:	Universitatea din Piteşti
Responsabilitate:	Universitatea din Piteşti. Departamentul Autovehicule şi Transporturi University of Piteşti. Faculty of Mechanics and Technology
Responsabilitate secundară:	Cheief ed. prof. univ. dr. Ion Tabacu
Titlu Paralel:	Scientific Bulletin. Automotive Series
Editura:	Editura Universităţii din Piteşti
Locul publicării:	Piteşti
Anul Ediției:	2011
Tipografie:	Editura Universităţii din Piteşti
ISSN:	1453-1100
Note:	Între 1997-[2009] a apărut în limba română
Limba:	Engleză
Titlu paralel:	Scientific Bulletin - University of Piteşti. Automotive Series
Subiect:	Autovehicule
Subiect:	Construcţia automobilelor
Subiect:	Lucrări ştiinţifice universitare
Subiect:	Motoare termice
Subiect:	Vehicule cu motor, maşini. Automobile. Industria automobilelor în general
Subiect:	Vehicule cu destinaţie specială
Cota topografică:	62(05) / B 91
Clasificare:	629.021(05)
Clasificare:	629.33(05)
Clasificare:	629.36(05)
Numerotare seriale:	Year XVII, No. 21, Volume A
Note conţinut (cuprins):	Experimental research on the forces of form tapping trapezoidal profiles - p. 5
Note conţinut (cuprins):	Using the Eco-Design approaching to realize the friendly products for the automotive industry - p. 15
Note conţinut (cuprins):	Utilization of the innovative methods in the redesign process of a product - p. 22
Note conţinut (cuprins):	Comparative analysis of employment - Romania and E.U., focused on the automotive sector - p. 33
Note conţinut (cuprins):	The influence of the working condition over the cutting forces in the processing of some ceramics - p. 38
Note conţinut (cuprins):	Concerning the influence exerted by the properties of ceramic materials on the cutting mechanism and the surface quality - p. 44
Note conţinut (cuprins):	The influence of the thermal cycling on grains size at the nickel-based alloys - p. 49
Note conţinut (cuprins):	Studies on the simulation for the milling process of PA 66 - GF 30 - p. 57
Note conţinut (cuprins):	Analytical modelling of the radial cold rolling of the trapezoidal profiles - p. 62
Note conţinut (cuprins):	The influence of process parameters on the deformation force when rolling trapezoidal profiles with rack tools - p. 70
Note conţinut (cuprins):	Production and maintenance policies optimization under a withdrawal right constraint - p. 81
Note conţinut (cuprins):	Optimal production and maintenance planning for random demand with variable production rate and subcontracting constraints - p. 91
Resurse On-Line:	http://automotive.upit.ro/

62(05) / B 91

Buletin Ştiinţific. Seria Autovehicule Rutiere : Materiale, tehnologii şi tehnici de management în industria de automobile = Scientific Bulletin. Automotive Series : Materials, technologies and management techniques in the automobile industry : No. 21, Volume A / Universitatea din Piteşti. Departamentul Autovehicule şi Transporturi; Cheief ed. prof. univ. dr. Ion Tabacu. ─ Year XVII, No. 21, Volume A.- Piteşti : Editura Universităţii din Piteşti, 2011 (Editura Universităţii din Piteşti)
Între 1997-[2009] a apărut în limba română
Anual
Experimental research on the forces of form tapping trapezoidal profiles - p. 5.
Using the Eco-Design approaching to realize the friendly products for the automotive industry - p. 15.
Utilization of the innovative methods in the redesign process of a product - p. 22.
Comparative analysis of employment - Romania and E.U., focused on the automotive sector - p. 33.
The influence of the working condition over the cutting forces in the processing of some ceramics - p. 38.
Concerning the influence exerted by the properties of ceramic materials on the cutting mechanism and the surface quality - p. 44.
The influence of the thermal cycling on grains size at the nickel-based alloys - p. 49.
Studies on the simulation for the milling process of PA 66 - GF 30 - p. 57.
Analytical modelling of the radial cold rolling of the trapezoidal profiles - p. 62.
The influence of process parameters on the deformation force when rolling trapezoidal profiles with rack tools - p. 70.
Production and maintenance policies optimization under a withdrawal right constraint - p. 81.
Optimal production and maintenance planning for random demand with variable production rate and subcontracting constraints - p. 91.
ISSN 1453-1100
= Buletin ştiinţific - Universitatea din Piteşti. Seria autovehicule rutiere

Universitatea din Piteşti
Bădescu, Neculae

629.021(05)
629.33(05)
629.36(05)
Autovehicule Construcţia automobilelor Lucrări ştiinţifice universitare Motoare termice Vehicule cu motor, maşini. Automobile. Industria automobilelor în general Vehicule cu destinaţie specială

LDR:02724nas 2200433 001 158465
009 ubfixit050.043 Buletin Ştiinţific : Seria Autovehicule Rutiere
011 $a 1453-1100
040 $a Ro
100 $a 20190306u m u0rumy50 ba
101 0 $a eng
102 $a RO
110 $a akuz 0xx0
200 0 $a Buletin Ştiinţific. Seria Autovehicule Rutiere $f Universitatea din Piteşti. Departamentul Autovehicule şi Transporturi $d Scientific Bulletin. Automotive Series $e Materiale, tehnologii şi tehnici de management în industria de automobile $g Cheief ed. prof. univ. dr. Ion Tabacu $e Materials, technologies and management techniques in the automobile industry : No. 21, Volume A $f University of Piteşti. Faculty of Mechanics and Technology
207 0 $a Year XVII, No. 21, Volume A
210 # # $a Piteşti $g Editura Universităţii din Piteşti $d 2011 $c Editura Universităţii din Piteşti $L s9981
300 $a Între 1997-[2009] a apărut în limba română
326 $a Anual
327 # # $a Experimental research on the forces of form tapping trapezoidal profiles - p. 5
327 # # $a Using the Eco-Design approaching to realize the friendly products for the automotive industry - p. 15
327 # # $a Utilization of the innovative methods in the redesign process of a product - p. 22
327 # # $a Comparative analysis of employment - Romania and E.U., focused on the automotive sector - p. 33
327 # # $a The influence of the working condition over the cutting forces in the processing of some ceramics - p. 38
327 # # $a Concerning the influence exerted by the properties of ceramic materials on the cutting mechanism and the surface quality - p. 44
327 # # $a The influence of the thermal cycling on grains size at the nickel-based alloys - p. 49
327 # # $a Studies on the simulation for the milling process of PA 66 - GF 30 - p. 57
327 # # $a Analytical modelling of the radial cold rolling of the trapezoidal profiles - p. 62
327 # # $a The influence of process parameters on the deformation force when rolling trapezoidal profiles with rack tools - p. 70
327 # # $a Production and maintenance policies optimization under a withdrawal right constraint - p. 81
327 # # $a Optimal production and maintenance planning for random demand with variable production rate and subcontracting constraints - p. 91
510 0 $a Scientific Bulletin - University of Piteşti. Automotive Series
530 0 $a Buletin ştiinţific - Universitatea din Piteşti. Seria autovehicule rutiere
606 $3 93090 $a Autovehicule
606 $3 93096 $a Construcţia automobilelor
606 $3 108461 $a Lucrări ştiinţifice universitare
606 $3 93147 $a Motoare termice
606 $3 91827 $a Vehicule cu motor, maşini. Automobile. Industria automobilelor în general
606 $3 98166 $a Vehicule cu destinaţie specială
675 $a 629.021(05)
675 $a 629.33(05)
675 $a 629.36(05)
679 $a 629 $d 62/64; 66/69
701 0 $3 5447 $4 070 $8 rumrum $a Bădescu $b Neculae $f 1942-
702 0 $3 77865 $4 220 $8 rumrum $a Tabacu $b Ion $c prof.univ.dr.ing. $f 1949-
710 0 0 $3 139301 $a Universitatea din Piteşti $b Departamentul Autovehicule şi Transporturi
801 0 $a RO $b UPIT $c 20141202 $g unimarc
850 $a UPIT
852 # # $j 62(05) / B 91
856 # $u http://automotive.upit.ro/

Număr Copie:	c.1
Nume localizare:	Sală periodice corp I
Numere deţinute:	Year XVII, No. 21, Volume A
2 Exemplar(e) disponibil(e)